What Is the Best Way to Remove Engineered Wood? Although removing flooring does not need any special skills, it can be time-consuming and dirty.
If any of the removal tasks require scraping and sanding, turning off the HVAC system in your house, or at the absolute least shutting off the vents in the space where you’re working, it can prevent dust from migrating to other sections of your home. When completing these tasks, remember to wear a dust mask.
Doing it yourself can be dangerous because the dust can irritate your lungs and throat. It’s much better to leave the engineered wood flooring removal to your Gold Canyon floor removal business.
Here’s how to do it the hard way, and by the end, you’ll realize why hiring a local tile removal firm is far better and safer.
Gold Canyon Floor Removal Experts & Engineered Wood?
Engineered wood flooring is made of a composite material with a natural wood veneer on top. To bind the timber to the subfloor, glue is used to construct engineered flooring. Panels are frequently attached but not to the flooring.
Depending on the construction method, specific engineered flooring is more difficult to remove than others. To reduce the job’s duration and complexity, use the right tools and equipment for the job.
DIY Methods to Remove Engineered Wood Floors
- Look at the floor’s edges. An entire floorboard should be visible on one foot, showing where the installers began laying the foundation. A partial or torn board is visible on the other side, showing where the installation was done. Begin removing engineered flooring from the entire board side.
- Using your pry bar and mini sled, pry up the first complete row of flooring. Make sure that the board’s tongue side is facing you. Engineered flooring is almost always easier to remove from the tongue side rather than the grooved edge.
- Set the depth of your engineered flooring with your circular saw. Put on your protective goggles and cut every 12 to 18 inches along the floor seams. Cut the board from one end to the other, being careful not to damage the wall.
- Create parallel cuts to the others you just created along the seams with your circular saw. Every 12 to 15 inches across the floor surface, cut the floorboards from one end to another. As you make these cuts, be careful not to damage the walls.
- Pry a portion of flooring along the starter row with your pry bar. Pry up each section of engineered flooring with your pry bar and mini sled.
- Using a floor scraper, remove the adhesive from the subfloor. If you’re having trouble removing the glue, pour some soapy water on the floor and let it soak in.
- To remove stubborn adhesive spots, use a chemical adhesive stripper. Ensure the space is well ventilated before using a paintbrush to add the stripping compounds to the adhesive. Allow a certain amount of time for them to soak up, then scrape the glue away with your floor scraper.
The Easy Way to Remove Engineered Wood with Kodiak Tile and Stone
Engineered wood, like ceramic tiles, can produce a lot of dust. It can irritate you and stay in your home for weeks due to the way it’s created.
Consider hiring professionals with dust-free gear to remove an engineered wood floor. Aside from that, you won’t have to worry about getting rid of the old floors because it is taken care of.
Kodiak provides exceptional customer service from the beginning. If you want to know more, you can Contact Kodiak Tile and Stone or fill in the compact form for a direct reply.