Machine to Remove Tile Floor? Gilbert Tile Removal

 

 

Is there a machine to remove tile floor? A typical Floor Stripper is a mechanical machine with a large, typically circular brush for removing wax from your floor.

Depending on how many tiles you’re removing, a tile floor remover may be large or small. The best tile removal companies in Gilbert have hoses installed for dust-free tile removal.

The thickness and hardness of the thinset that sits underneath the tiles will decide the number of tiles removed every hour. Even with this equipment, however, you can find it challenging to complete the task independently.

 

How Hard is It to Remove Tile Flooring? Gilbert Manual Tile Removal

Kodiak Tile and Stone have seen so many unfished jobs of tile removal. It appears a simple task, yet once you have spent all day covered in dust and you are not halfway, it is degrading.

In a simplified form, here are the steps you’d take.

  1. Use a demolition chipping hammer, a jackhammer, or a sledgehammer to break up the tile’s surface. Installed fixtures like toilets and cabinets are generally a good place to start. Exposed piping may also be an excellent place to start.
  2. Pull the tile pieces up with your pry bar or handheld scraper.
  3. Through your scraper, smooth out any rough spots.
  4. Sweep the tile pieces into a trash can or onto a tarp to be removed.
  5. After that, vacuum the workspace.
  6. Examine the floor. If you have a plywood sublayer, make sure there are no exposed nails and that the surface is ready to receive new flooring.
  7. If you have a concrete subfloor, make sure it’s level and in good shape and that it doesn’t need to be repaired or replaced.

 

Machine Assisted Dust Free Tile Removal

If you were to rent a floor removal machine, you would find it far more manageable. Here are the steps for your tile removal operations.

  1. Become acquainted with the tile removal machine’s protection and operation features.
  2. Set up the machine to your liking, including the handle angle and blade style if necessary.
  3. Start the tile removal machine in one corner of the room.
  4. Bit by bit, push the tile-removal machine around the room, clearing the tile with your broom and removing it from the work area as needed.
  5. If you’re having trouble removing a tile with a machine, try working under it with one of the blade’s corners.
  6. If the tile has been removed and discarded, vacuum the work area.
  7. Examine the floor. If you have a plywood sublayer, make sure there are no exposed nails and that the surface is ready to receive new flooring.
  8. If you have a concrete subfloor, make sure it’s level and in good shape and that it doesn’t need to be repaired or replaced.

 

 

How Long For Ceramic Dust to Settle | Gilbert Tile Removal

Unfortunately, if you don’t take precautions, you can find dust circulating your home for weeks.

Kodiak Tile and Stone can complete most jobs inside a day, and with hoses for dust-free tile removal service, you can have floors free from dust, and you won’t have harmful particles in your home. Allow the tile experts to inspect and complete the job to get a new floor and upgrade your tile room.

Contact Kodiak Tile and Stone, or you can fill in the compact form for a direct reply.

You can check out customer reviews here, ‘SoTellUs’ and the BBB reviews for more information.

 

Photo by Nathon Oski on Unsplash

Fill Out Form
Complete form for a fast response